Troubleshooting Your 1995 Plymouth Voyager's Headlights: A Comprehensive Guide

When your 1995 Plymouth Voyager's headlights are not functioning properly, it can be a frustrating experience. However, with the right steps and the correct troubleshooting techniques, you can identify and resolve the issue. This guide will help you through the process, ensuring your headlights are working optimally.

Common Symptoms and Issues

If your 1995 Plymouth Voyager's headlights don't have high or low beams, but have blinkers and running lights, it is likely pointing towards a fault in the headlight circuit. Some possible causes include faulty fuses or relays, a defunct headlight switch, or issues with the headlight bulbs or other electrical components.

Troubleshooting Steps

To diagnose and fix the issue, follow these steps:

1. Check for Voltage at the Headlights

The first step in troubleshooting your 1995 Plymouth Voyager's headlight problem is to check for voltage. Use a multimeter to test voltage at the headlights. If there is no voltage, proceed to the next steps.

2. Test the Headlight Switch

If there is no voltage, check if there is power coming from the headlight switch. This can help you determine if the issue lies within the switch. If the switch shows no voltage, it may be time to replace it.

3. Inspect the Fuses and Relays

Inspect the fuses and relays, making sure they are all in working order. If any are faulty or blown, replace them. This is a common issue that often resolves the problem.

4. Check the Bulbs

Inspect the headlight bulbs for any signs of damage or wear. Replace any faulty bulbs, as bad bulbs can cause the headlights to malfunction.

5. Test the Body Control Module (BCM)

If the above steps do not identify the issue, the Body Control Module (BCM) may be at fault. Test the BCM to ensure it is functioning properly. If the BCM is faulty, it will need to be replaced.

6. Test the Multifunction Switch

Finally, test the multifunction switch to ensure it is working correctly. This switch controls multiple functions, including headlight beams, so any issues here can affect both the high and low beams.

Common Pitfalls and Advice

Many individuals face similar challenges when troubleshooting headlights. Common pitfalls include:

1. Skipping Basic Tests

Be sure to test for voltage at the headlights first. This simple step can often identify the problem and save you time by avoiding unnecessary replacements.

2. Ignoring the Fusebox Diagram

Refer to the fusebox diagram below the steering wheel to identify the correct fuses to check. It lists the name of the circuit, the amp rating, and the fuse number. Simply providing the fuse numbers, without the circuit names or amp ratings, can still be helpful in diagnosing the issue.

Fusebox Diagram:

Example: 1995 Plymouth Voyager Fusebox Diagram

3. Forgetting to Check Under-the-Hood Fuses

Do not overlook the fuses inside the engine compartment. These can also be the source of the problem.

Fuses under the hood: Check the fuses mentioned in the fusebox diagram. If they are blown, replace them. .FC-1: Check fuse number 10A. Check fuse number 20A. Check fuse number 30A. Check fuse number 40A.

Conclusion

By following these steps and addressing potential issues, you can effectively troubleshoot and resolve the problem with your 1995 Plymouth Voyager's headlights. Should you encounter any further difficulties, do not hesitate to seek professional assistance or consult the vehicle's manual for additional guidance.